Astra Owners Network banner

Oxygen Sensor Problems

1 reading
20K views 17 replies 3 participants last post by  noriquach  
We've seen a lot of sensors coming incorrectly wired from new (Delphi in particular)
 
Have a read of this,it's the sort of thing that's happening
 
Before you jump to any conclusions i need to know exactly which 1.6 engine this is,XEP,XER or XE1,
if you're not sure,post the reg number
 
Ok that engine doesn't have a maf,just an inlet air temperature sensor,so that's why your app isn't reporting any airflow,
both of your codes are 02 sensor heater so would point to a power feed or earth problem,
i know you say F26 is intact but i would swap it out regardless,i'll get the 02 sensor pinout and post later,so you can unplug and check the voltage at the sensor and check the replacement 02 is wired correctly.
 
And check there's continuity between 1 & 3 on the sensor itself (should be the 2 white wires)