Hi all had my car mapped, performance all good my issue is I had the egr and swirl flaps deleted,I have blanked egr and swirl flaps removed/welded. I am getting car with spanner light on dash when they are both unplugged and peddle test shows 0400 egr fault and 1109 and 1110 both swirl flap...

I just got an astra 1.9cdti sri 150 and when I looked there is no swirl bar and a tube near it has been plugged, does this mean someone has already locked the flaps in open position and what is that tube which has been plugged? http://imgur.com/a/cK5Ym u should be able to see the pics in that...

I just got an astra 1.9cdti sri 150 and when I looked there is no swirl bar and a tube near it has been plugged, does this mean someone has already locked the flaps in the open position, and what is that tube which has been plugged? car pulls great and drove it 12 mile back on motorway no problems

Basically my 1.9 was shooting white smoke out of exhaust when I start car noticed my mpg wasn't the best so thought best check the swirl flap to find out it had come of and was laying on top of the inlet... After more looking a noticed that I could move them starting from left to right number...

Thanks everyone it's sorted!

Hello, My first post to the network has to be about the dreaded Swirl Flaps Code P110963. I am new to Vauxhall in general, Only ever owned 2 x Austin minis before this, prompted to buy a diesel for motorway miles. Anyway to the point, I was coming home from picking the girlfriend up from work...

Hi guys, the old swirl flaps are away on my astra h 1.9 cdti (Z19DTH) :confused: and as the actuator is still working, I bought a new inlet mainfold and gasket and was due to get it fitted by a friend on Friday. We were informed by another friend that we could get away with not removing the hp...

Hi guys, looking for abit of advice, got my astra 1.9 cdti 06 plate with 50k only 2 weeks ago and today i was going to clean the EGR and noticed that the swirl rod looked abit squiffed so i literally touched it and it fell out of its pivot holes. I tried starting the car and it would judder...